Lenze EY System cables and system connectors - Manual (Page 18)

About this documentation
Symbol key
1
l
18 EDSYPFLD EN 8.0
1.5 Symbol key
Symbol Meaning
U
V
W
Motor with plug connection
U
V
W
Motor and blower with plug connection
Feedback with plug connection
U
V
W
Motor with terminal box
U
V
W
Motor and blower with terminal box
Feedback with terminal box
Cable between motor and servo controller/frequency inverter
Connection on the servo controller/frequency inverter
Connection on the control cabinet (terminal strip)
Cable for fixed installation
Cable for trailing cable installation
Plug−in connector with screw plug(socket)
Plug−in connector with SpeedTec(socket)
Plug−in connector with SpeedTec(pin)
Sub−D plug
Sub−D plug with locking hook
Structure of the system cable
A Cross−section
d
Diameter
r Bend radius
a
Maximum acceleration
v
Maximum traversing speed
n Minimum number of bending cycles
Mass
DC resistance at 20°C
B
Temperature range for operation
T
Temperature range for transport and storage
Outer sheath: PCV (polyvinyl chloride)
Outer sheath: PUR (polyurethane)
Colour of sheath