beautypg.com

4 main power connection – INFICON XTC/C Thin Film Deposition Controller User Manual

Page 20

background image

1 - 4

IP

N 07

4-

18

3X

XTC/C - XTC/2 Operating Manual

1.1.4 Main Power Connection

WARNING

This instrument has line voltage present on the
primary circuits whenever it is plugged into a main
power source.

Never remove the covers from the instrument during
normal operation.

There are no operator serviceable items within this
instrument.

Removal of the top or bottom covers must be done
only by a technically qualified person.

If this instrument is installed into a rack system which
contains a mains switch, this switch must break both
sides of the line when it is open and it must not
disconnect the safety ground. This configuration is
required in order to comply with accepted European
safety standards.

This manual is related to the following products: