INFICON Cygnus Thin Film Deposition Controller - Manual (Page 85)

4 - 1
IP
N 07
4-
37
9-
P1
K
Cygnus Operating Manual
Chapter 4
General Parameters
4.1 Introduction
Cygnus system level configuration is accomplished through the General
Parameters display. Further configuration of the Logic Statements and I/O is
accomplished through displays accessed from the General Parameters display.
General parameters set up is initiated by selecting the GENERAL PARMS (F1) key
in the All Channels data display.
Figure 4-1 Display Tree for General Parameters, Logic Statement, and I/O Set Up
ALL CHANNELS DATA DISPLAY
GENERAL PARAMETERS
LOGIC DIRECTORY
I/O MAP
FLOPPY DISK