INFICON Cygnus Thin Film Deposition Controller - Manual (Page 139)

5 - 35
IP
N 07
4-
37
9-
P1
K
Cygnus Operating Manual
5.4.5.2 Remote General Action Commands
The message format is:
RG()
Command ID = See Remote General Action commands below.
Action Value = ...|...|...
Command Response:
ACK|
22
0x16
Clears all failed crystals except the current
crystal.
23
0x17
Reinitialize the crystal information
24
0x18
Rotate Sensor Head
Table 5-10 Remote Channel Commands (continued)
RC
Command
ID Meaning Action Value
Table 5-11 Remote General Action Commands
RG
Command
ID Meaning Action Value
1
(0x01)
Stop All
2
(0x02)
Reset All
3
(0x03)
Remote Lock On, i.e. No parameters can be
updated from the front panel.
4
(0x04)
Remote Lock Off
5
(0x05)
Set Logic Statement to True.
Only takes action if the Logic Statement Event is
set to "Computer Control", otherwise it is
ignored.
1 to 100