INFICON Cygnus Thin Film Deposition Controller - Manual (Page 122)

5 - 18
IP
N 07
4-
37
9-
P1
K
Cygnus Operating Manual
5.4.3.4 Input Name Parameters
5.4.3.4.1 Query Input Name
Query: The message format is:
QI
Input Number = 0 to 28 (0 = all inputs)
Command Response:
If Input Number was 1 to 28:
ACK|
If Input Number was 0:
ACK...|Code>
Input Name = Up to 10 characters, null terminated.
5.4.3.4.2 Update Input Names
Update: The message format is:
UI|Name>...
Input Number = 0 to 28 (0 = all inputs)
Input Name = Up to 10 Characters, null terminated.
Command Response:
ACK|
NOTE: Input Names may only be updated if all channels are in Ready or Stop and
are not crystal switching on any channel.