INFICON Cygnus Thin Film Deposition Controller - Manual (Page 25)

1 - 11
IP
N 07
4-
37
9-
P1
K
Cygnus Operating Manual
Crystal Fail Option . . . . . . . . . . . . . . 0 / 1 / 2
0 = Time Power,
1 = Idle Ramp
2 = Stop
Can be selected for each source individually.
Crystal Quality . . . . . . . . . . . . . . . . . 0 to 9
Crystal Stability . . . . . . . . . . . . . . . . . 0 to 9
Auto-Z. . . . . . . . . . . . . . . . . . . . . . . . Yes / No
1.4.3 User Interface
Front Panel / CRT. . . . . . . . . . . . . . . Parameters can be programmed through
Cygnus front panel. There is a display for
each source with graphical and text / number
information. There is also a display showing
text and number information for all sources.
Remote Communications . . . . . . . . . Parameters can be programmed through
computer communications. Complete control
of source state sequencing available by
remote communications.
I/O. . . . . . . . . . . . . . . . . . . . . . . . . . . Control of state sequencing, starting /
stopping each source, is available using
Inputs and Outputs.
PC Applications Software . . . . . . . . . Optional, Compatible with RS232
communications or National Instruments
PCI-GPIB Controller and NI-488.2 protocol.
Operating System. . . . . . . . . . . . Windows 2000
Function . . . . . . . . . . . . . . . . . . . Complete Cygnus programming, Monitoring
of sources.