INFICON Cygnus Thin Film Deposition Controller - Manual (Page 114)

5 - 10
IP
N 07
4-
37
9-
P1
K
Cygnus Operating Manual
5.4.3.1.2 Update All Parameters
Update: The message format is:
UA
Length = 2 bytes (low byte / high byte)
All Channel 1 parameters, all Channel 2 parameters,...all Channel 6
parameters.
All General parameters
All Logic Statements
All Output Types
All Output Names
All Input Names
Command Response:
ACK|
NOTE: All channels in the instrument need to be in Ready or Stop for this
command to be accepted.
5.4.3.2 Channel Parameters
5.4.3.2.1 Query Channel Parameters
Query: This command returns a specific parameter or all parameters for a specified
channel.
The message format is:
QC
Command ID = See Table 5-4 .
Channel Number = 1 to 6
Command Response:
ACK<|>|
Description: Type of response depends on Command ID, see "Data Type" column
of the table below.
Special Case: QC0 will return all Channel parameters for the
given channel, in numerical order.