INFICON Cygnus Thin Film Deposition Controller - Manual (Page 168)

8 - 2
IP
N 07
4-
37
9-
P1
K
Cygnus Operating Manual
DISK IS FULL
There is not enough capacity on the floppy disk to save the requested
configuration file or datalog string.
DISK WRITE PROTECTED
The Save requested cannot be performed when the floppy disk is physically
write protected.
DUPLICATE CHANNEL
Channel values entered into a Thickness Equation can not be duplicated, for
example a value of 123 is allowed, a value of 223 is not allowed.
EDIT IN PROGRESS
The I/O Map display cannot be exited while an edit name operation is
occurring.
FILE CHECKSUM ERROR
Indicates the instrument configuration file being loaded from the floppy disk is
corrupt and does not pass the checksum verification. The instrument
parameters remain unchanged from prior to the load operation.
FILE FORMAT ERROR
Indicates the file being loaded from the floppy disk is not in the proper
instrument configuration file format. The instrument parameters remain
unchanged from prior to the load operation.
FILE RANGE ERROR
This error message indicates the configuration file contains a value which
exceeds the allowed range for a particular parameter. This may occur if
transferring files between two different versions of instrument software and
one of the software versions has a different acceptable range of values for a
given parameter.
FILE READ ERROR
The load operation could not be completed due to an error reading the floppy
disk. The instrument parameters remain unchanged from prior to the retrieve
operation.
HARDWARE DEFINED
An attempt is being made to use an Input or Output that has been previously
defined.
ILLEGAL BAUD RATE
Baud rate selections are 2400, 4800, 9600, or 19200.
ILLEGAL DATE
The month or day entry is invalid. Month numbers must be in the 01 to 12
range; day numbers must be in the correct range for the month specified.