Dascom 7010 PrintServer Manual - Manual (Page 135)

Printer Status and Printer Messages
Print Server User Manual 135
Configuring Email Notification via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Double-click the print server or printer in the print server list.
The Properties dialog appears.
3. Select Configuration – Notification from the navigation bar.
4. Select Email Notification.
5. Select the tab of the relevant recipient.
6. Configure the parameters; see: Table 12
Ö
135.
7. Click OK to confirm.
ª
The settings are saved.
Table 12: Parameters for Email Notification
* In the case of print servers with several physical printer ports, you must select the relevant port.
Parameters Description
Email active Enables or disables email notification.
Mail recipient Here, you can specify the email address of the
recipient.
Accounting
Job history, Time interval (h), Jobs Here, you can specify if you want to receive a
notification containing information about the
number of print jobs processed by the print
server. Notifications can be sent after a defined
interval or after a defined number of print jobs.
Valid numbers are 1 to 60 print jobs.
Accounting *
(Page Counter, Time interval (h),
Page interval) Here, you can specify if you want to receive a
notification containing information about the
number of pages printed by the printer.
Notifications can be sent after a defined interval
or after a defined number of pages printed.
Printer error *
(Paper empty, Paper jam, etc.) Here, you can specify the type of printer error
that will cause a notification.