Dascom 7010 PrintServer Manual - Manual (Page 212)

Appendix - Parameter List
Print Server User Manual 212
Table 26: Parameter List - WLAN
Parameters Value Description
wifi_mode
[Mode] 1 = infrastructure mode
2 = Ad-Hoc mode Defines the communication mode.
The communication mode defines the
network structure in which the print server
will be installed.
wifi_channel
[Channel] 1
~
14 Defines the channel to which the entire
data communication will be transmitted.
The channel (frequency range) should be
changed if interferences emerge.
Channels 1 through 14 are available.
Keep yourself informed about national
provisions regarding the use of WLAN
products and only use authorized
channels.
wifi_name
[SSID] max. 64 characters
[a-z, A-Z, 0-9, _, -] Defines the SSID.
The ID of a wireless network is referred to
as SSID (Service Set Identifier) or
network name. Each wireless LAN has a
configurable SSID in order to clearly
identify the wireless network.
wifi_encrypt
[Encryption] 0 = none
1 = WEP (Open
System)
2 = WEP (Shared Key)
3 = WPA (TKIP)
4 = WPA (AES)
5 = WPA2 (TKIP)
6 = WPA2 (AES)
Defines the encryption method to be
used.
wifi_keyid
[WEP key used] 0 = none
1 = wifi_wepkey
2 = wifi_wepkey2
3 = wifi_wepkey3
4 = wifi_wepkey4 Specifies the ID of the currently used
WEP key.
wifi_wepkey
wifi_wepkey2
wifi_wepkey3
wifi_wepkey4
[WEP Key] The max. number of
characters depends on
the selected model.
64 ASCII = 5
64 HEX = 10
128 ASCII = 13
128 HEX = 26 Defines the WEP key used. Four WEP
keys are available.
You can enter the following characters:
- Hexadecimal = 0-9, a-f, A-F
- ASCII = 0-9, a-z A-Z
wifi_psk
[PSK] 8 - 63 characters Defines the Pre Shared Key (PSK) for
Wi-Fi Protected Access (WPA).