Dascom 7010 PrintServer Manual - Manual (Page 197)

Additional Features
Print Server User Manual 197
Configuring IPv6 Settings
You can configure several IPv6 settings.
Requirements
;
The print server is connected to a network that supports IPv6.
Proceed as follows:
1. Start the PRINTSERVER Homepage or start the
PRINTSERVER-NetTool and double-click the print server in the
print server list.
2. Select Configuration – IPv6
3. Configure the IPv6 parameter.
4. Click Save or OK to confirm.
ª
The settings are saved.
Table 24: IPv6 Parameters
Parameter Description
IPv6 Enables/disables the IPv6 functionality of the print server.
IPv6 address Defines a print server IPv6 unicast address assigned manually
in the format n:n:n:n:n:n:n:n.
Every 'n' represents the hexadecimal value of one of the eight
16 bit elements of the address. An IPv6 address may be
entered or displayed using a shortened version when
successive fields contain all zeros (0). In this case, two colons
(::) are used.
Router Defines the IPv6 unicast address of the router. The print
server sends his 'Routers Solicitations' (RS) to this router.
Prefix length Defines the length of the subnet prefix for the IPv6 address.
(The value 64 is preset.)
Address ranges are indicated by prefixes. The prefix length
(Number of used bits) is added to the IPv6 address and
specified as a decimal number. The decimal number is
separated by ’/’ .
Automatic configuration Enables/disables the automatic assignment of the IPv6
address for the print server.