Dascom 7010 PrintServer Manual - Manual (Page 150)

Maintenance
Print Server User Manual 150
7. Click Edit.
A text editor with the 'parametrers' file will be opened.
8. Edit the file. The syntax and values can be obtained from the
parameter list; see:
Ö
209.
9. Save the file.
Downloading the 'Parameters' File to one or more Print Servers
using the PRINTSERVER-NetTool
You can configure one or more print servers using the 'parameters'
file. For this purpose, the file is downloaded to the print server.
When downloading the 'parameters' file to several print servers, the
parameter default settings 'IP address,' 'Host name,' and 'NetBIOS
name' of the respective print server will be maintained. All other
settings will be overwritten by those in the 'parameters' file.
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Select one or more print servers from the print server list.
3. Select Actions – Download Parameters File from the menu bar.
The Parameter Download dialog appears; see Fig. 22
Ö
149.
4. Click Choose.
The Parameter Download dialog appears.
5. Specify the ’parameters’ file.
6. Click Open.
7. Decide on the password option:
If the print server displayed in the list are not
password-protected or protected by different passwords,
activate Ask for each password.
If the print servers are protected by the same password,
activate Use this password and enter the password.
8. Click Start download.