Dascom 7010 PrintServer Manual - Manual (Page 155)

Maintenance
Print Server User Manual 155
Resetting Internal
Print Servers
[Phase 1] Print Server Reset [Phase 2] Device Restart
Turn the printer off. Turn the printer off.
Press the status button of the
print server and keep it
pressed. Turn the printer on.
Turn the printer on.
Wait until the Activity- and
Status-LED start blinking
simultaneously.
The Reset Mode is activate. Press the status button for a
short time.
Release the status button for
about 2 seconds.
The LEDs blink alternatingly.
Press the status button once
again and keep it pressed.
The LEDs blink simultaneously.
After few seconds only the
Activity-LED blinks consistently.
Release the status button.
[Phase 3] Status Check