Printserver print monitor, Printserver printer wizard, Printserver- nettool – Dascom 7010 PrintServer Manual User Manual
Page 203: Default name, Hardware address
Appendix - Glossary
Print Server User Manual
203
PRINTSERVER
Print Monitor
The PRINTSERVER Print Monitor is an specific extension for the
printing service of a Windows operating system. The software
ensures the transfer of unencrypted and encrypted (SSL/TLS) print
data from the client to the print server by means of direct TCP/IP
ports. The PRINTSERVER Print Monitor can be installed and
configured on every client intended for printing. The Print Monitor
supports 32-bit systems.
PRINTSERVER
Printer Wizard
The PRINTSERVER Printer Wizard is a self-extracting program that
helps to install a network printer via a print server in Windows
networks. The tasks of the PRINTERSERVER Printer Wizard include:
- installation of the PRINTSERVER Print Monitor
- printer driver installation
- installation of print server and printer
- setting up the printer
- printing a test page
PRINTSERVER-
NetTool
The software PRINTSERVER-NetTool has been developed for the
administration of network devices within a predefined network.
Default Name
Hardware Address
The print server is addressable by means of its world-wide unique
hardware address. This address is commonly referred to as the
Ethernet address. The manufacturer has defined this address in the
hardware of the device. The address consists of 12 hexadecimal
numbers. The first six numbers represent the manufacturer, while
the last six numbers identify the individual device.