Dascom 7010 PrintServer Manual - Manual (Page 101)

Print Server Certificate Management
Print Server User Manual 101
7. Click Next. The parameters are listed.
8. Confirm by clicking Next.
ª
The certificate will be created and installed. This may take a few
minutes.
Table 6: Parameters for the Creation of Certificates
Parameters Description
Common name Is used to clearly identify the certificate. It is advisable to use the
IP address or the host name of the print server to allow a clear
assignment of the certificate to the print server. You can enter a
maximum of 64 characters.
E-mail address Specifies an email address. You can enter a maximum of 40
characters. (Optional Entry)
Organization name Specifies the company that uses the print server. You can enter a
maximum of 64 characters.
Organizational
unit Specifies the department or subsection of a company. You can
enter a maximum of 64 characters. (Optional Entry)
Locality name Specifies the locality where the company is based. You can enter
a maximum of 64 characters.
State name Specifies the state in which the company is based. You can enter
a maximum of 64 characters. (Optional Entry)
Country name Specifies the country in which the company is based. Enter the
two-digit country code according to ISO 3166. Examples:
DE = Germany, GB = Great Britain, US = USA
Issued on Specifies the date after which the certificate is valid.
Expires on Specifies the date after which the certificate is invalid.