Dascom 7010 PrintServer Manual - Manual (Page 158)

Maintenance
Print Server User Manual 158
The dynamic update cannot be used to save an earlier version of the
software in the print server. In this case use the standard update.
In order to reduce the amount of administration you can carry out
an update for several print servers at the same time. To this purpose,
the update files have to be stored in a directory.
Requirements
;
The print server is known to the network via its IP address.
;
All print jobs are finished.
What do you want
to do?
†
’Standard Update via the PRINTSERVER Homepage’
Ö
158
†
’Standard Update via the PRINTSERVER-NetTool’
Ö
159
†
’Standard Update via FTP’
Ö
160
†
’Dynamic Update via the PRINTSERVER Homepage’
Ö
160
†
’Dynamic Update via the PRINTSERVER-NetTool’
Ö
162
†
’Dynamic Update via FTP’
Ö
162
†
’Perform an Update to more than one Print Server’
Ö
163
Standard Update via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Actions – Download Area.
3. Select Standard Firmware Update.
4. Click Browse.
5. Select the update file.
6. Click Download.
ª
The update is executed. The print server is restarting.