Dascom 7010 PrintServer Manual - Manual (Page 163)

Maintenance
Print Server User Manual 163
Perform an Update to more than one Print Server
The PRINTSERVER-NetTool allows you to carry out an update to
more than one print server.
Requirements
;
All required software files (Updates) are located in one directory.
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Select the print servers from the print server list.
3. Select Actions – Firmware Update from the menu bar. The
Dynamic Update dialog appears; see Fig. 24
Ö
161.
4. Click Choose.
5. Select the directory in which the software files are located.
6. Click OK to confirm.
7. Check whether the right software files are shown in the list. If
necessary, change the assignment of the software files to the
print servers by right-clicking the print server.
8. If one single password is used for all print servers, select Use
this password and enter the password.
9. Click Start update.
10. Confirm the security query.
ª
The update is executed. The print servers are restarted.