Dascom 7010 PrintServer Manual - Manual (Page 83)

Print Server Security
Print Server User Manual 83
In order to disable the IP sender control you must enter ’*’ into
the first IP sender box. Once an IP sender has been defined, all
undefined clients lose their authorization to print via the print
server.
What do you want
to do?
†
’Assigning Authorizations via the PRINTSERVER Homepage’
Ö
83
†
’Assigning Authorizations via the PRINTSERVER-NetTool’
Ö
83
Assigning Authorizations via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – Protection.
3. Enter the IP addresses or host names of authorized clients into
the IP sender box. (A host name can only be used if DNS was
configured beforehand.)
4. Click Save to confirm.
ª
The settings are saved.
Assigning Authorizations via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Double-click the print server in the print server list.
The Properties dialog appears.
3. Select Configuration – Protection from the navigation bar.
4. Enter the IP addresses or host names of authorized clients into
the IP sender box. (A host name can only be used if DNS was
configured beforehand.)
5. Click OK to confirm.
ª
The settings are saved.