Dascom 7010 PrintServer Manual - Manual (Page 186)

Additional Features
Print Server User Manual 186
ª
The setting is saved.
Using .print AutoConnect
.print AutoConnect is a tool within the .print technology for the
automatic creation of print objects. The print objects are created on
the basis of defined templates without the need to automatically
load the printer drivers.
Printers can be combined in printer groups and printer locations on
the basis of so-called printer classes. A name table translation
(Dynamic Printer Matrix) simplifies the creation of classes and the
assignment of printers.
In the case of several drivers we recommend the assignment of the
appropriate printer drivers via the printer class. This assignment can
be set up accordingly in the printer configuration on the .print client.
Proceed as follows:
1. Start the PRINTSERVER Homepage or start the
PRINTSERVER-NetTool and double-click the print server in the
print server list.
2. Select Configuration – ThinPrint®.
3. Configure the parameters; see: Table 23
Ö
186.
4. Click Save or OK to confirm.
ª
The setting is saved.
Table 23: ThinPrint® AutoConnect Parameters
Parameter Description
ID The ID clearly identifies the printers for the ThinPrint® server.
Printer The printer name is bound to the ID and gives the print object a
description for a better differentiation.
Class Printers with compatible drivers can be arranged in one class.
Driver Specifies the printer driver for the embedded printer.