Dascom 7010 PrintServer Manual - Manual (Page 107)

Print Server Certificate Management
Print Server User Manual 107
10.5 How to Save Root Certificates in the Print Server
The print server has got several EAP authentication procedures. If
you use EAP-TLS, for example, you must load the root certificate of
the authentication server (RADIUS) to the print server.
The root certificate must be in base 64 format.
What do you want
to do?
†
’Saving Root Certificates via the PRINTSERVER Homepage’
Ö
107
†
’Saving Root Certificates via the PRINTSERVER-NetTool’
Ö
107
Saving Root Certificates via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – Certificates.
3. Select Root certificate.
4. Click Browse.
5. Select the root certificate.
6. Click Load root certificate.
ª
The root certificate is saved in the print server. This may take a
few minutes.
Saving Root Certificates via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Select a print server from the print server list.
3. Select Actions – Certificate – Root certificate from the menu
bar. The Certificate dialog appears.
4. Click '...'.
5. Enter the root certificate.
6. Click Load.