Importing ipsec configuration files, Importing the pre-shared key, Importing certificates – Dascom 7010 PrintServer Manual User Manual
Page 128
Internet Protocol Security (IPsec)
Print Server User Manual
128
Importing IPsec Configuration Files
You must load the files in the print server so that the values of
configuration files ’setkey.conf’ or ’racoon.conf’ can be applied.
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – IPsec.
3. Select Load files.
4. Click Browse.
5. Select the configuration file.
6. Click Load.
7. Click Save to confirm.
ª
The settings of the configuration file will be saved.
Importing the Pre-Shared Key
If the authentication method ’Pre-Shared Key’ is used for an SA (see:
Table 10
123) the pre-shared key must be saved in the print
server.
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – IPsec.
3. Select Load files.
4. Next to Preshared keys file click Browse….
5. Select the file.
6. Click Load.
7. Click Save to confirm.
ª
The pre-shared key is loaded.
Importing Certificates
If an authentication via certificates is used for the SA (see: Table 10
123), you must save certificates in the print server. To save