Dascom 7010 PrintServer Manual - Manual (Page 81)

Print Server Security
Print Server User Manual 81
8.1 How to Define a Password for the Print Server
(Read/Write Protection)
Write Protection A password can protect the print server against unauthorized
parameter modifications. If a password was set, you must enter the
password before you can save the changes to the parameters. This
means that changes to the parameters can only be made using a
valid password.
Read Protection If you do not want your parameters to be displayed, you can set a
password at this stage as well. For this purpose, the parameter
Access control must be enabled. If this parameter is enabled, a
password must be entered when opening the PRINTSERVER
Homepage or the Properties dialog via the PRINTSERVER-NetTool.
Note that the print server password is not identical to the password
which the print server needs for logging in Novell networks. The
Novell password is generated automatically by the print server and
is invisible to the user.
What do you want
to do?
†
’Defining the Password via the PRINTSERVER Homepage’
Ö
81
†
’Defining the Password via the PRINTSERVER-NetTool’
Ö
82
Defining the Password via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – Protection.
3. Enter a password into the Password box in order to enable the
write protection.
4. Tick Access control in order to define the read protection, if
required.
5. Click Save to confirm.
ª
The settings are saved.