Dascom 7010 PrintServer Manual - Manual (Page 230)

Appendix - Parameter List
Print Server User Manual 230
Table 37: Parameter List - EAP Authentication
http
[HTTP] on/off Enables/disables the HTTP protocol on
the print server.
If the HTTP protocol is disabled, those
functions that are based on the protocol
will not be available (e.g. the
PRINTSERVER Homepage cannot be
started).
Parameters Value Description
eap_auth_type
[Authentication] Print Server with
WLAN
1 = Open System
2 = Shared Key
3 = EAP-MD5/LEAP
4 = EAP-TLS
5 = EAP-TTLS
6 = PEAP
7 = EAP-FAST
Print Server without
WLAN
1 = not defined
2 = not defined
3 = EAP-MD5/LEAP
4 = EAP-TLS
5 = EAP-TTLS
6 = PEAP
7 = EAP-FAST
Defines the authentication method that is
used to identify devices or users in the
network.
eap_auth_name
[User name] max. 64 characters Defines the name of the print server as
saved in the authentication server
(RADIUS).
eap_auth_pwd
[Password] max. 64 characters Defines the password of the print server as
saved in the authentication server
(RADIUS).
eap_auth_
anonymous_name
[Anonymous name] max. 64 characters Defines the anonymous name for the
unencrypted part of the EAP
authentication methods TTLS, PEAP, and
FAST.
Parameters Value Description