Dascom 7010 PrintServer Manual - Manual (Page 173)

Supported Network Protocols
Print Server User Manual 173
15.6 SMTP
SMTP (Simple Mail Transfer Protocol) is a protocol that controls the
sending of emails in networks.
Benefits and
Purpose
SMTP is needed in the print server to administer the print server via
email (see:
Ö
36) and get printer information via email (see:
Ö
134).
Requirements
;
A DNS server has been configured on the print server; see:
Ö
65.
Proceed as follows:
1. Start the PRINTSERVER Homepage or start the
PRINTSERVER-NetTool and double-click the print server in the
print server list.
2. Select Configuration - Mail - SMTP.
3. Configure the SMTP parameters; see: Table 19
Ö
173.
4. Click Save or OK to confirm.
ª
The settings are saved.
The PRINTSERVER Homepage offers an alternative access to the
SMTP input mask. The SMTP input mask can also be found under the
menu item 'Configuration' - 'Notification' - 'Email Notification'.
Table 19: SMTP Parameters
Ignore mail exceeding Here, you can specify the maximum email size (in
KB) to be accepted by the print server.
(0 = unlimited)
Parameters Description
Parameters Description
Server name IP address or Host name of the SMTP server