Dascom 7010 PrintServer Manual - Manual (Page 97)

Print Server Network Authentication
Print Server User Manual 97
The authentication of print server models with WLAN support is
configured via the menu item Configuration - WLAN.
Enabling EAP-FAST via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – Protection.
3. Select Authentication.
4. Select EAP-FAST from the Authentication list.
5. Enter the user name and the password that are used for the
configuration of the print server on the RADIUS server.
6. Select the settings intended to secure the communication in the
channel.
7. Click Save to confirm.
ª
The settings are saved.
Enabling EAP-FAST via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Double-click the print server in the print server list.
The Properties dialog appears.
3. Select Configuration – Protection from the navigation bar.
4. Select the Authentication tab.
5. Select EAP-FAST from the Authentication list.
6. Enter the user name and the password that are used for the
configuration of the print server on the RADIUS server.
7. Select the settings intended to secure the communication in the
channel.
8. Click OK to confirm.
ª
The settings are saved.