Ess manually; see, Saving ipv6 addresses, Displaying ipv6 addresses – Dascom 7010 PrintServer Manual User Manual
Page 196
Additional Features
Print Server User Manual
196
Saving IPv6 Addresses
For information about the automatic assignment of IPv6 addresses;
see:
Assigning IP
Addresses manually
You can assign a unicast address to the print server manually.
Proceed as follows:
1. Start the PRINTSERVER Homepage or start the
PRINTSERVER-NetTool and double-click the print server in the
print server list.
2. Select Configuration - IPv6.
3. Tick IPv6.
4. Enter the IPv6 unicast address into the IPv6 address box.
5. Click Save or OK to confirm.
ª
The setting is saved.
Displaying IPv6 Addresses
The IPv6 addresses that are saved in the print server can be
displayed.
Requirements
;
The print server is connected to a network that supports IPv6.
;
The 'IPv6' parameter has been enabled in the print server.
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Status - IPv6.
ª
The IPv6 addresses are displayed.