Dascom 7010 PrintServer Manual - Manual (Page 78)

Print Server Port Settings
Print Server User Manual 78
2. Double-click the print server in the print server list.
The Properties dialog appears.
3. Select Configuration – Printer Port.
4. Select the desired mode from the Port mode list.
5. Click OK to confirm.
ª
The setting is saved.
7.4 How to Configure COM1 Port Settings
In the case of print server models with COM1 port, you can adapt
the COM1 interface to your individual needs.
What do you want
to do?
†
’Configuring the COM1 Port via the PRINTSERVER Homepage’
Ö
78
†
’Configuring the COM1 Port via the PRINTSERVER-NetTool’
Ö
78
Configuring the COM1 Port via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – Printer Port.
3. Select the desired settings from the COM1 list boxes; see:
Table 5
Ö
79.
4. Click Save to confirm.
ª
The setting is saved.
Configuring the COM1 Port via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Double-click the print server in the print server list.
The Properties dialog appears.
3. Select Configuration – Printer Port.