Dascom 7010 PrintServer Manual - Manual (Page 124)

Internet Protocol Security (IPsec)
Print Server User Manual 124
Defining IKE Templates
The IKE template contains the parameters to be used for the
automatic key exchange.
The ’IKE Default’ template has been implemented by default. You
can specify another 3 templates, if required.
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – IPsec.
3. Select Edit rules.
4. Select Edit SA templates.
5. Select Edit IKE templates.
6. Specify the IKE template; see: Table 11
Ö
124.
7. Click Save to confirm.
ª
The settings are saved.
Table 11: IKE Template Parameters
Parameter Description
Name Name of the IKE template.
You can enter a maximum of 16 characters.
- Phase 1 -
IKE Phase 1 establishes a secure channel.
Negotiation Specifies the procedure for the negotiation of the encryption and
authentication.
- In the ’Main Mode’ individual connections will be successively
established for the individual steps (key exchange etc.).
- In the ’Aggressive Mode’ individual steps of the Main Mode will
be summarized (faster but less secure).
You can select several procedures. Only the most secure
procedure will be applied. If a procedure fails, a less complicated
(and therefore less secure) procedure will be used.
Diffie-Hellman group Specifies the Diffie-Hellman group number for the creation of
dynamically generated temporary keys. The keys are used
during the negotiation.
Encryption algorithm Specifies the encryption algorithm to be used during the
negotiation.