Dascom 7010 PrintServer Manual - Manual (Page 136)

Printer Status and Printer Messages
Print Server User Manual 136
12.3 How to Get Printer Messages via SNMP Traps
You can get SNMP trap notifications from the connected printers.
You can define under which circumstances the printer will send a
notification.
This allows two freely definable recipients to get information about
the printer status, printer errors (such as Paper empty), the number
of pages printed, or print jobs.
The information that can be shown depends on the connected
printer model.
What do you want
to do?
†
’Enabling SNMP Trap Notification via the PRINTSERVER
Homepage’
Ö
136
†
’Enabling SNMP Trap Notification via the PRINTSERVER-NetTool’
Ö
136
Enabling SNMP Trap Notification via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – Notification.
3. Select SNMP Trap Notification.
4. Define the recipient via the IP address.
5. Configure the parameters; see: Table 13
Ö
137.
6. Click Save to confirm.
ª
The settings are saved.
Enabling SNMP Trap Notification via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Double-click the print server or printer in the print server list.
The Properties dialog appears.