Dascom 7010 PrintServer Manual - Manual (Page 89)

Print Server Network Authentication
Print Server User Manual 89
Enabling EAP-MD5/LEAP via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – Protection.
3. Select Authentication.
4. Select EAP-MD5/LEAP from the Authentication list.
5. Enter the user name and the password that are used for the
configuration of the print server on the RADIUS server.
6. Click Save to confirm.
ª
The settings are saved.
Enabling EAP-MD5/LEAP via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Double-click the print server in the print server list.
The Properties dialog appears.
3. Select Configuration – Protection from the navigation bar.
4. Select the Authentication tab.
5. Select EAP-MD5/LEAP from the Authentication list.
6. Enter the user name and the password that are used for the
configuration of the print server on the RADIUS server.
7. Click OK to confirm.
ª
The settings are saved.