Dascom 7010 PrintServer Manual User Manual
Page 216
Appendix - Parameter List
Print Server User Manual
216
ip_zconf
[ZeroConf]
on/off
Enables/disables the automatic
verification of an IP address conflict via
ZeroConf.
ZeroConf describes a procedure for the
automatic assignment of IP addresses.
ipv6
[IPv6]
on/off
Enables/disables the IPv6 functionality of
the print server.
ipv6_addr
[IPv6 address]
n:n:n:n:n:n:n:n.
Defines a print server IPv6 unicast
address assigned manually.
Every 'n' represents the hexadecimal
value of one of the eight 16 bit elements of
the address. An IPv6 address may be
entered or displayed using a shortened
version when successive fields contain all
zeros (0). In this case, two colons (::) are
used.
ipv6_gate
[Router]
n:n:n:n:n:n:n:n.
Defines the IPv6 unicast address of the
router. The print server sends his 'Routers
Solicitations' (RS) to this router.
ipv6_plen
[Prefix length]
0 - 64
Defines the length of the subnet prefix for
the IPv6 address. (The value 64 is preset.)
Address ranges are indicated by prefixes.
The prefix length (Number of used bits) is
added to the IPv6 address and specified
as a decimal number. The decimal
number is separated by ’/’ .
ipv6_auto
[Automatic
configuration]
on/off
Enables/disables the automatic
assignment of the IPv6 address for the
print server.
sys_name
[Host name]
max. 64 characters
Defines the host name of the print server.
sys_descr
[Description]
max. 128 characters
Defines a free description (of the print
server).
sys_contact
[Contact person]
max. 64 characters
Defines a free description (of a contact
person).
sys_location
[Location]
max. 64 characters
Defines a free description (of the location
of the device).
Parameters
Value
Description