Dascom 7010 PrintServer Manual - Manual (Page 52)

Print Server Installation
Print Server User Manual 52
Adding an HTTP
Printer Port
Proceed as follows:
1. Start the PRINTSERVER Print Monitor; see:
Ö
47.
2. Enter the IP address or the host name of the print server and
click Next. The following dialog appears:
Fig. 12: PRINTSERVER Print Monitor – Selecting a Printing Method
3. Tick HTTP printing and click Next. The following dialog appears:
Fig. 13: PRINTSERVER Print Monitor - Port Configuration-HTTP
4. Select a logical printer (lp1 - lp8) from the list.
The logical printer defines the printer port to which the print data is sent. This is
relevant for print server models with several physical printer ports (COM1, USB1,
etc.).
5. Select Encrypted printing if you wish to encrypt the print data;
see: ’Encrypted Socket Printing (Windows)’
Ц
84.