Dascom 7010 PrintServer Manual - Manual (Page 49)

Print Server Installation
Print Server User Manual 49
Starting the PRINTSERVER Print Monitor (Print Object available)
The PRINTSERVER Print Monitor is started by adding a new port to
the print object.
Requirements
;
The PRINTSERVER Print Monitor is installed on the client.
;
The print object is already available on the client.
Proceed as follows:
1. Click 'Start' > 'Settings' > 'Printers and Faxes'.
2. Select the printer from the list.
3. Select File – Settings from the menu bar.
The Properties dialog appears.
4. Select the Ports tab.
5. Click Add.
The Printer Ports dialog appears.
Fig. 8: Windows - Printer Ports
6. Select PRINTSERVER Print Monitor.
7. Click New Port.
ª
The PRINTSERVER Print Monitor is started. The dialog TCP/IP
Port Configuration appears; see:
Ö
48.
If the print server is protected by a password, the password will be
demanded; see
Ц
81.