Dascom 7010 PrintServer Manual - Manual (Page 68)

Device Settings of the Print Server
Print Server User Manual 68
5. Select the code for your local time zone from the Time zone list.
6. Click Save to confirm.
ª
The settings are saved.
Configuring the Device Time via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Double-click the print server in the print server list.
The Properties dialog appears.
3. Select Configuration – Time from the navigation bar.
4. Tick SNTP.
5. Enter the IP address or the domain name of the time server into
the Time server box. (The domain name can only be used if DNS
was configured beforehand).
6. Select the code for your local time zone from the Time zone list.
7. Click OK to confirm.
ª
The settings are saved.