Dascom 7010 PrintServer Manual - Manual (Page 31)

Print Server Administration
Print Server User Manual 31
Print Server List All connected devices are shown in a list in the right-hand section of
the main dialog of the PRINTSERVER-NetTool. This section is referred
to as the print server list.
Icons indicate the status or the kind of network device. Devices that
are not available in the network appear dimmed.
The print server list is divided into columns that contain information
about the device, the version, etc. You can adapt the information
according to your needs. Select Extras – Columns from the menu
bar.
You can select various filters in the left-hand section of the main
dialog. Filters determine which network devices are shown in the
print server list. The filters can be created and configured via the
Filter menu.
You can modify the status of the print server list by
• adding network devices
• creating a new list or
• refreshing the list
Select the relevant command in the Search menu.
By activating an automatic refresh, the print server list will be
refreshed automatically in a fixed time interval. Select Extras –
Settings from the menu bar (category: Auto Refresh).
You can save the print server list as a file. The file ending is ’*.lst’. This
allows you to preserve a certain status and to restore it promptly.
Select File – Save as or Open from the menu bar.