Dascom 7010 PrintServer Manual User Manual
Page 220
Appendix - Parameter List
Print Server User Manual
220
ipsec_tmpl1_psk
ipsec_tmpl1_psk
ipsec_tmpl1_psk
ipsec_tmpl1_psk
[Pre-Shared Key]
max. 16 characters
Specifies the Pre-Shared Key (PSK).
You need the key if the ’Pre-Shared Key’
procedure has been selected as
’Authentication type’.
ipsec_tmpl1_key
_exchange
ipsec_tmpl2_key
_exchange
ipsec_tmpl3_key
_exchange
ipsec_tmpl4_key
_exchange
[IKE]
0 = ---
1 = IKE template ’IKE
Default’
2 = IKE template 2
3 = IKE template 3
4 = IKE template 4
Specifies the template to be used for the
IKE (automatic key exchange) within a
SA.
cp. parameter
’ipsec_key_exchange1_name’
The ’IKE Default’ template has been
implemented by default. You can specify
another three IKE templates, if required.
ipsec_key_exchange
1_name
ipsec_key_exchange
2_name
ipsec_key_exchange
3_name
ipsec_key_exchange
4_name
[Name]
max. 16 characters
[a-z, A-Z, 0-9, _, -]
Name of the IKE template.
ipsec_key_exchange
1_modes
ipsec_key_exchange
2_modes
ipsec_key_exchange
3_modes
ipsec_key_exchange
4_modes
[Negotiation]
main, aggressive
Specifies the procedure for the negotiation
of the encryption and authentication.
- In the ’Main Mode’ individual connections
will be successively established for the
individual steps (key exchange etc.).
- In the ’Aggressive Mode’ individual steps
of the Main Mode will be summarized
(faster but less secure).
You can select several procedures. Only
the most secure procedure will be applied.
If a procedure fails, a less complicated
(and therefore less secure) procedure will
be used.
Parameter
Value
Description