Dascom 7010 PrintServer Manual - Manual (Page 66)

Device Settings of the Print Server
Print Server User Manual 66
Configuring DNS via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – DNS.
3. Configure the DNS parameters; see: Table 4
Ö
66.
4. Click Save to confirm.
ª
The settings are saved.
Configuring DNS via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Double-click the print server in the print server list.
The Properties dialog appears.
3. Select Configuration – DNS from the navigation bar.
4. Configure the DNS parameters; see: Table 4
Ö
66.
5. Click OK to confirm.
ª
The settings are saved.
Table 4: DNS Parameters
Parameters Description
DNS Enables/disables DNS.
Domain name Domain name of an existing DNS server
(e.g. company.de)
Primary DNS server IP address of the primary DNS server
(e.g. 192.168.0.21)
Secondary DNS server IP address of the secondary DNS server.
The secondary DNS server is used if the primary
DNS server is not available.