Dascom 7010 PrintServer Manual User Manual
Page 218
Appendix - Parameter List
Print Server User Manual
218
ipsec_rule1_iaddr_tmpl
ipsec_rule2_iaddr_tmpl
ipsec_rule3_iaddr_tmpl
ipsec_rule4_iaddr_tmpl
[Address filter]
0 = ---
1 = Address Template 1
2 = Address Template 2
3 = Address Template 3
4 = Address Template 4
5 = Address Template 5
6 = Address Template 6
7 = Address Template 7
8 = Address Template 8
Specifies the filter within an IPsec rule for
the IP traffic via a template.
cp. parameter ’iaddr_tmpl1_name’
ipsec_rule1_iserv_tmpl
ipsec_rule2_iserv_tmpl
ipsec_rule3_iserv_tmpl
ipsec_rule4_iserv_tmpl
[Service filter]
0 = ---
1 = Service Template 1
2 = Service Template 2
3 = Service Template 3
4 = Service Template 4
Specifies the filter within an IPsec rule for
protocols and services via a template.
cp. parameter ’iserv_tmpl1_name’
ipsec_rule1_ipsec_tmpl
ipsec_rule2_ipsec_tmpl
ipsec_rule3_ipsec_tmpl
ipsec_rule4_ipsec_tmpl
[Security
association (SA)]
0 = ---
1 = SA Template 1
2 = SA Template 2
3 = SA Template 3
4 = SA Template 4
Specifies the parameters of the ’Security
Association’ via a template.
cp. parameter ’ipsec_tmpl1_name’
ipsec_rule1_action
ipsec_rule2_action
ipsec_rule3_action
ipsec_rule4_action
[Action]
0 = Allow all
1 = Drop all
2 = Require IPsec
As specified within the IPsec rule, this is
the action to be carried out if a data packet
matches the description of a filter.
iaddr_tmpl1_name
iaddr_tmpl2_name
iaddr_tmpl3_name
iaddr_tmpl4_name
iaddr_tmpl5_name
iaddr_tmpl6_name
iaddr_tmpl7_name
iaddr_tmpl8_name
[Name]
max. 18 characters
[a-z, A-Z, 0-9, _, -]
Name of the address template. The
template is used for filtering the IP traffic.
Local and remote IP addresses can be
defined in the address template.
Addresses in the format IPv4 and IPv6 are
supported.
iaddr_tmpl1_ip_remote
iaddr_tmpl2_ip_remote
iaddr_tmpl3_ip_remote
iaddr_tmpl4_ip_remote
iaddr_tmpl5_ip_remote
iaddr_tmpl6_ip_remote
iaddr_tmpl7_ip_remote
iaddr_tmpl8_ip_remote
[Remote (IPv4)]
- IPv4 address
- IPv4 address range
- All IPv4 addresses =
0.0.0.0/0
Specifies a remote IPv4 address or an
IPv4 address range for an address
template.
The notation of address ranges is done via
the CIDR methodology, e.g.
192.168.0.1/24.
Parameter
Value
Description