Parameter list - tcp/ip, Table 28: parameter list - tcp/ip – Dascom 7010 PrintServer Manual User Manual
Page 215
Appendix - Parameter List
Print Server User Manual
215
Table 28: Parameter List - TCP/IP
Parameters
Value
Description
tcpip
[TPC/IP]
on/off
Enables/disables the TCP/IP protocol.
If you have disabled TCP/IP, all functions
based on this protocol are no longer
available. This means that, for example,
the PRINTSERVER Homepage or FTP
will no longer be available.
ip_addr
[IP Address]
valid IP address
Defines the IP address of the print server.
ip_mask
[Subnet mask]
valid IP address
Defines the subnet mask of the print
server.
ip_gate
[Gateway]
valid IP address
Defines the gateway address of the print
server.
ip_dhcp
[DHCP]
on/off
Enables/disables the DHCP protocol.
ip_bootp
[BOOTP]
on/off
Enables/disables the BOOTP protocol.
ip_auto
[ARP/PING]
on/off
Enables/disables the IP address
assignment via ARP/PING.
ip_set_by
[IP Address]
0 = Unknown
1 = SNMP (NetTool)
2 = BOOTP
3 = DHCP
4 = PING
5 = not defined
6 = ZeroConf
7 = 'parameters' file
8 = not defined
9 = not defined
10 = not defined
11 = not defined
12 = HTTP Homepage
Shows the applied method for the IP
address assignment.
ip_auto_gate
[Multicast router
as gateway]
on/off
Enables/disables the automatic entry of a
found multicast router as gateway
address.
If disabled, the gateway address has to be
entered manually.