Dascom 7010 PrintServer Manual - Manual (Page 153)

Maintenance
Print Server User Manual 153
Resetting Parameters via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Actions – Default Settings.
3. Click Default Settings.
ª
The parameters are reset.
Resetting Parameters via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Select a print server from the print server list.
3. Select Actions – Default Settings from the menu bar.
4. Click Finish.
ª
The parameters are reset.
Resetting Parameters via an FTP Connection
Proceed as follows:
1. Open an FTP connection to the print server:
Syntax: ftp
Example: ftp 192.168.0.123
2. Enter either the print server password or press ENTER if no
password has been assigned.
3. Reset the parameters:
quote SITE RESET
4. Close the FTP connection:
quit
5. As for internal print server models, turn the printer off and back
on.
As for external print server models, disconnect and reconnect
the power socket on the print server or turn the print server off
and back on.
ª
The parameters are reset.