Dascom 7010 PrintServer Manual - Manual (Page 95)

Print Server Network Authentication
Print Server User Manual 95
4. Select EAP-PEAP from the Authentication list.
5. Enter the user name and the password that are used for the
configuration of the print server on the RADIUS server.
6. Select the settings intended to secure the communication in the
TLS channel.
7. To make the connection more secure, you can also install the
root certificate of the RADIUS server on the print server.
8. Click Save to confirm.
ª
The settings are saved.
Enabling PEAP via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Double-click the print server in the print server list.
The Properties dialog appears.
3. Select Configuration – Protection from the navigation bar.
4. Select the Authentication tab.
5. Select EAP-PEAP from the Authentication list.
6. Enter the user name and the password that are used for the
configuration of the print server on the RADIUS server.
7. Select the settings intended to secure the communication in the
TLS channel.
8. To make the connection more secure, you can also install the
root certificate of the RADIUS server on the print server.
9. Click OK to confirm.
ª
The settings are saved.