Dascom 7010 PrintServer Manual - Manual (Page 137)

Printer Status and Printer Messages
Print Server User Manual 137
3. Select Configuration – Notification.
4. Select SNMP Trap Notification.
5. Select the tab of the relevant recipient.
6. Define the recipient via the IP address.
7. Configure the parameters; see: Table 13
Ö
137.
8. Click OK to confirm.
ª
The settings are saved.
Table 13: Parameters for SNMP Trap Notification
* In the case of print servers with several physical printer ports, you must select the relevant port.
Parameters Description
IP address Here, you can specify the IP address of the recipient
to whom the SNMP traps will be sent.
Trap community Here, you can specify the Trap community.
Authentication traps Enables or disables the authentication traps.
Printer traps Enables or disables the sending of traps in case of a
printer error.
Printer error *
(Paper empty, Paper jam, etc.) Here, you can specify the type of printer error that
will cause a notification.