Dascom 7010 PrintServer Manual - Manual (Page 183)

Additional Features
Print Server User Manual 183
Assigning Logical Printers
Depending on your system, logical printers may be addressed in
various ways. The assignment often takes place during the print
server installation; see: ’Print Server Installation’
Ö
40.
Table 22: Addressing Logical Printers in Systems
TCP/IP Port TCP/IP port in accordance with the logical printer.
The following default values apply:
no. 1 = 9100
no. 2 = 9101
no. 3 = 9102
no. 4 = 9103
no. 5 = 9104
no. 6 = 9105
no. 7 = 9106
no. 8 = 9107
Printer Port Defines the port used by the logical printer for printing. (This
parameter is only available for print server models with several
physical printer ports.)
System Syntax
Windows In Windows networks, you may use the corresponding TCP/IP
ports instead of the logical printers; see ’TCP/IP Port’
Ö
206.
FTP In the case of an FTP print data transfer, the logical printers
are addressed with 'lp1' through 'lp8'.
Example: put lp1
Parameters Description