Dascom 7010 PrintServer Manual - Manual (Page 103)

Print Server Certificate Management
Print Server User Manual 103
6. Save the request in a text file.
7. Send the text file as certificate request to a certification
authority.
When the CA certificate has been received, it must be saved in the
print server; see: ’How to Save CA Certificates in the Print Server’
Ö
104.
Creating a Certificate Request via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Select a print server from the print server list.
3. Select Actions – Certificate – Server certificate from the menu
bar. The Certificate dialog appears.
4. Tick Create certificate request.
5. Click Next.
6. Enter the relevant parameters, see: Table 6
Ö
101.
7. Click Next. The parameters are listed.
8. Confirm by clicking Next. The creation of the certificate request
is in progress. This may take a few minutes.
9. Save the request in a text file.
10. Send the text file as certificate request to a certification
authority.
When the CA certificate has been received, it must be saved in the
print server; see: ’How to Save CA Certificates in the Print Server’
Ц
104.