Dascom 7010 PrintServer Manual - Manual (Page 58)

Print Server Status Information
Print Server User Manual 58
5.2 Which Status Information Is Available?
This section gives an overview of the print server status information.
Depending on the features supported by the print server model,
different status information can be available.
General Status The General page shows status information, such as the name of the
print server, the hardware address, the serial and version numbers,
network type etc. The text which you previously entered under
'Configuration - General' will now appear under 'Description.' A
description is freely definable and can be used to gain a better
overview of the print servers and printers in the system.
WLAN Status The WLAN page contains information about the current WLAN
settings.
• 'Connection Status' indicates the status of the network
connection. The following statuses are possible:
'Ad-Hoc', when the print server is working in the ad-hoc mode.
'Infrastructure', when the print server is working in the infrastructure mode.
'Out of range', when the print server is logged onto an access point in the
infrastructure mode and this access point cannot be reached because it has
been turned off, for example.
'Searching', when the print server has been turned on and searches for an
access point.
• 'Current network name' specifies the SSID.
• 'Speed' indicates the data transfer rate.
• 'Level' indicates the intensity of the signal.
• 'Manufacturer' indicates the manufacturer of the WLAN module.
• 'Serial number WLAN' indicates the serial number of the WLAN
module.
Printer Port Status The Printer Port page contains information about the connected
printers. The page includes information about the manufacturer, the
printer model or the total number of printed pages. The printer
operating panel and printer status messages can also be displayed.
The information that can be shown depends on the printer and print
server model. As for print servers with several physical printer ports,
the information is displayed separately for each port.