Dascom 7010 PrintServer Manual - Manual (Page 140)

Print Jobs and Print Data
Print Server User Manual 140
13 Print Jobs and Print Data
What information do
you need?
• ’How to Define a Timeout for Taking on Print Jobs’
Ö
140
• ’How to Assign Print Jobs Directly’
Ö
141
• ’How to Modify Print Data’
Ö
143
• ’How to Convert Print Data’
Ö
145
13.1 How to Define a Timeout for Taking on Print Jobs
You can restrict print jobs to a certain period of time (timeout). If
the spooler does not send any print job within the specified time
frame, the connection between the print server and the spooler will
be interrupted.
Benefits and
Purpose
A timeout limits the duration of a connection and thus allows other
connections to establish.
Proceed as follows:
1. Start the PRINTSERVER Homepage or start the
PRINTSERVER-NetTool and double-click the print server in the
print server list.
2. Select Configuration – General.
3. Enter the seconds after which the connection will be aborted
into the Job receive timeout box. We recommend to set the
value to '120'. If the value is set to '0', this function is disabled.
4. Click Save or OK to confirm.
ª
The setting is saved.
This chapter contains information concerning the
administration of print jobs and print data. You will
learn how to load and assign print jobs directly to the
print server, how to time print jobs, and how to modify
and convert print data.