Dascom 7010 PrintServer Manual - Manual (Page 211)

Appendix - Parameter List
Print Server User Manual 211
tp_port
[ThinPrint® port] 1 - 65535
[5 characters, 0-9] Defines the ThinPrint® port number.
The port number of the print server must
be identical to the port number that was
defined for the ThinPrint® server.
tp_bandwidth
[Bandwidth] on/off Enables/disables the bandwidth value of
the ThinPrint® port (client side).
tp_bandwidthval
[Bandwidth] 1600 - 1000000
[7 characters, 0-9] Defines the bandwidth in bit/second (bit/s)
used to decrease the bandwidth limit on
the ThinPrint® port (client side).
job_rcvtmout
[Job receive
timeout] 1 - 9999
[4 characters, 0-9]
0 = no timeout Specifies the timeout (in seconds) for
receiving print jobs.
If the spooler does not send any print job
within the timeout period, the connection
between the print server and the spooler
will be interrupted. If the value is set to 0,
this function is disabled. If you want to
use the timeout option, we recommend
using the value '120'.
eth_conf
[Ethernet
settings] 0 = Auto
1 = 10BaseT/FL HALF
2 = 10BaseT/FL FULL
3 = 100BaseFX/TX
HALF
4 = 100BaseFX/TX
FULL
5 = 1000BaseT/SX Defines the network speed of the print
server.
'Auto' means that the network speed is
recognized automatically. If the speed is
set manually, it must be adapted to the
other network devices.
Parameters Value Description