Dascom 7010 PrintServer Manual - Manual (Page 219)

Appendix - Parameter List
Print Server User Manual 219
iaddr_tmpl1_ip6_local
iaddr_tmpl2_ip6_local
iaddr_tmpl3_ip6_local
iaddr_tmpl4_ip6_local
iaddr_tmpl5_ip6_local
iaddr_tmpl6_ip6_local
iaddr_tmpl7_ip6_local
iaddr_tmpl8_ip6_local
[Local (IPv6)] - IPv6 address
- IPv6 address range
- All IPv6 addresses =
::/0
Specifies a local IPv6 address or an IPv6
address range for an address template.
The notation of address ranges is done via
the CIDR methodology.
iaddr_tmpl1_ip6_remote
iaddr_tmpl2_ip6_remote
iaddr_tmpl3_ip6_remote
iaddr_tmpl4_ip6_remote
iaddr_tmpl5_ip6_remote
iaddr_tmpl6_ip6_remote
iaddr_tmpl7_ip6_remote
iaddr_tmpl8_ip6_remote
[Remote (IPv6)] - IPv6 address
- IPv6 address range
- All IPv6 addresses =
::/0 Specifies a remote IPv6 address or an
IPv6 address range for an address
template.
The notation of address ranges is done via
the CIDR methodology.
iserv_tmpl1_name
iserv_tmpl2_name
iserv_tmpl3_name
iserv_tmpl4_name
[Name] max. 16 characters
[a-z, A-Z, 0-9, _, -] Name of the service template.
The template is used for filtering the IP
traffic by services and protocols.
iserv_tmpl1_services
iserv_tmpl2_services
iserv_tmpl3_services
iserv_tmpl4_services
[Services] ALL, ICMP, HTTP,
SNMP, SNTP, IPP,
Socket printing, LPR,
ThinPrint Specifies the elements of the service filter.
Several protocols can be combined in a
service.
ipsec_tmpl1_name
ipsec_tmpl2_name
ipsec_tmpl3_name
ipsec_tmpl4_name
[Name] max. 16 characters
[a-z, A-Z, 0-9, _, -] Name of the IPsec template.
The IPsec template specifies the
parameters of a ’Security Association’.
ipsec_tmpl1_certificate
ipsec_tmpl2_certificate
ipsec_tmpl3_certificate
ipsec_tmpl4_certificate
[Authentication type] 1 = Certificates
0 = Pre-Shared Key Specifies the procedure for the
authentication of the remote server. Two
procedures are available:
- authentication via pre-shared key
- authentication via certificates.
ipsec_tmpl1_verify
ipsec_tmpl2_verify
ipsec_tmpl3_verify
ipsec_tmpl4_verify
[Verify certificate] on/off Specifies the type of certificate required
for the certificate-based authentication.
Disabled: A self-signed certificate is
sufficient for the authentication.
Enabled: A root certificate is required for
the authentication.
Parameter Value Description