Dascom 7010 PrintServer Manual - Manual (Page 33)

Print Server Administration
Print Server User Manual 33
Configuring Print
Server Parameters
The PRINTSERVER-NetTool offers three methods to configure the
parameters of network devices.
Configuration via the 'Properties' Dialog
Many network devices offer the 'Properties' dialog where you can
display and edit the individual configuration parameters of the
device. Double-click the print server in the print server list to start
the dialog.
Configuration via Wizards
Wizards in the PRINTSERVER-NetTool facilitate the installation and
configuration of network devices. Wizards are subprograms aimed at
querying required parameter values.
Depending on the print server model and network, you can choose
from the following wizards:
Mark the print server in the print server list and start the required
wizard via the Installation menu.
Configuration via the ‘Actions’ Menu
Depending on the network device, you can use the Actions menu for
individual operations (such as an Update). Select the relevant
command from the Actions menu.
IP Wizard The IP Wizard helps you to configure the TCP/IP parameters, e.g.
the IP address. You can choose between the manual
configuration and the automatic configuration via boot protocols.
The IP Wizard is not available for WLAN print servers.
Wireless Wizard The Wireless Wizard helps you to install WLAN print servers. The
Wireless Wizard helps you to configure TCP/IP and WLAN
parameters and the details about encryption and authentication.
The Wireless Wizard is only available for WLAN print servers.
PRINTSERVER
Printer Wizard The PRINTSERVER Printer Wizard is available for installing the
print server in Windows networks. This PRINTSERVER Printer
Wizard helps you to install a print server connected to a printer.