Toshiba Magnia 3310 User Manual

Page 87

Text mode
Original mode

Installing and Removing Hardware

Cooling fan

Connectors on the motherboard

NOTE: When connecting a standard or redundant fan mod-
ule, however, be careful not to connect its cable to an incor-
rect terminal.

In this server system, a combination of standard intake and
exhaust fan modules is referred to as “standard fan set 1,”
and a combination of redundant intake and exhaust fan mod-
ules as “redundant fan set 1.”

8 Loosen the screw of the redundant exhaust fan module spacer,

and remove the spacer.

Removing the spacer

FAN2-R

FAN2